User Manual

12 TVE-DEC11 IP Video Decoder User Manual
2. Select the channel to be decoded from the Decoding Camera No. drop-down
list.
3. Enter a dwell time in the Dwell Time box. This is the time in seconds that the
image is displayed before moving on to the next one.
4. Click Edit to define the channel parameters. In the window enter the channel
parameters:
Manufacturer: Select the Manufacturer of encoding device connected to be
decoded. Encoding devices from the following manufactures are supported:
TRUVISION, HIKVISION, PRIVATE, PANASONIC, SONY, AXIS, SANYO,
BOSCH, ZAVIO, ARECONT, PELCO, SAMSUNG and ONVIF.
Remote IP Address: Enter the IP address of the encoding device.
Remote Port: Enter the port of the encoding device.
Camera No.: Enter the channel number of the encoding device to be decoded.
Protocol: Select the protocol for data transmission, TCP, UDP or MCAST.
Stream Type: Select the stream type to decode, either main stream or sub-
stream.
Note: Up to 64 cameras can be decoded in sequence.
5. Click Save to save the settings and return to the previous window.
Remote playback
Use this function to remotely access the encoder to stream and decode stored files
for local output. The encoder must have storage capabilities.
To set up remote playback:
1. Click Decoding Operation > Decode Mode > Remote playback. The Remote
Playback window appears.