User Manual

TVE-DEC11 IP Video Decoder User Manual 11
2. Enter the channel parameters:
Decoding Camera No.: Select the decode channel.
Manufacturer: Select the manufacturer of the encoding device connected to be
decoded. Encoding devices from the following manufactures are supported:
TRUVISION, HIKVISION, PRIVATE, PANASONIC, SONY, AXIS, SANYO,
BOSCH, ZAVIO, ARECONT, PELCO, SAMSUNG, and ONVIF.
Remote Host Address: Enter the IP address of the encoding device to be
decoded.
Remote Host Port: Enter the port of the encoding device to be decoded.
Remote Host Camera No.: Enter the channel number of the encoding device to
be decoded.
User Name/Password: Enter the user name and password used to log into the
encoding device.
Transmission protocol: Select the protocol for data transmission, either TCP,
UDP or MCAST.
Stream Type: Set the stream type to be decoded and the default type is main
stream. The substream is supported for decoding when the encoding device
supports dual stream.
3. Click Start Decoding to start decoding.
Sequence mode
Set up the decoder so that the decoded images of multiple streams from a camera
are automatically sequenced with a set dwell time between each image.
To set up the decoding sequence:
1. Click Decoding Operation > Decode Mode > Sequence Decoding. The
Sequence Decoding window appears.