User Manual

10 TVE-DEC11 IP Video Decoder User Manual
Decoder operation
Use these menus to define how the decoder operates. There are four main
submenus in the decoder menu tree. See Figure 7 below.
Figure 6: Menu tree of Decoding Operation
Decoding Operation
Decode Mode
Decode Control
Decoding Status
Transparent Channel
Connection Status
Decoding Channel
Display Channel
Ch Enable/Disable
Picture Overlay
Dynamic Decoding
Sequence Decoding
Remote Playback
Display Control
Table 1: Description of decoder menus
Function Description
Decode mode Select decoding channels and sequence.
• Configure playback on recorded files.
• Configure display channel, video format, output resolution
and display mode.
Decode control Enable/disable a decoding channel, scale video output
image, and configure picture overlay.
Decoding status Display decoding channel status and video output status.
Transparent channel Set up transparent data transmission between the encoder
and decoder.
Dynamic decoding
Use this function to set up the parameters of each channel to be decoded.
To set up dynamic decoding:
1. Click Decoding Operation > Decoding Mode > Dynamic Decoding. The
Dynamic Decoding window appears.