Manual

2 TVE-DEC10 IP Video Decoder User Manual
Product description
Figure 1: Front panel
LED indicator
Description
PWR
The power LED
LINK
Network connection LED
RX/TX
Data transmitting/receiving status LED
RESET
Reset to factory default settings
VGA
VGA decoding output
DVI
DVI decoding output
HDMI
HDMI decoding output
VIDEO OUT
BNC decoding output
Figure 2: Back panel
Item
Name
Description
1.
MIC In
Microphone input.
2.
Audio Out
Connect to an audio output device. R is right channel, L is left
channel.
3.
RS-232
Connect to an RS-232 device, such as a computer.
4.
RS-485
Connect to RS-485 serial port.
5.
Alarm Out
Connect up to two alarm relay outputs.
Alarm In
Connect up to four alarm relay inputs.
6.
LAN
Connect the 10M/100Mbps self-adaptive UTP Ethernet port to a
network.
7.
12 VDC
Connect a 12 V power supply via a PSU.
8.
GND
Connect to ground.