Manual

26 TVE-DEC10 IP Video Decoder User Manual
Device management
Use this window to update the decoder firmware, restore factory default settings
and reboot the device.
Note: Any changes to the default passwords will be lost after a factory reset or
firmware upgrade.
To update the firmware:
1. Click Device Management > Upgrade. The upgrade window appears.
2. Click Upgrade Status to see the current firmware version installed in the
decoder
3. Under “Upgrade File”, click Browse to locate the upgrade file from a local
back-up device. Click Upgrade to start importing.
To restore factory default settings:
1. Click Device Management > Restore Default. The restore default window
appears.
2. Click:
Complete to restore all factory settings including IP address and network
settings.
- Or -
Simple to restore factory settings except for IP address and network settings.
The default settings are restored immediately.
To restart the decoder:
1. Click Device Management > Reboot. The Reboot window appears.
2. Click OK. The decoder restarts.