Manual

TVE-DEC10 IP Video Decoder User Manual 13
2. Select the channel for playback from the Decoding Channel drop-down list.
3. Under Device Properties, enter the channel parameters:
Remote host IP address: Enter the IP address of the encoding device.
Remote host port: Enter the port of the encoding device.
Remote host port: Enter the port of the encoding device.
Remote host channel: Enter the channel number of the encoding device to
be decoded.
User ID/password: Enter the user name and password used to log into the
encoding device.
Remote playback by file: Enter the file name of the file to be played back
from the DVR. This is found from a search of the stored files on the DVR.
Remote playback by time: Enter the start and end time of the file to be
played back.
4. Click Save to save the settings.
5. Click to start playback.
Control playback by using the buttons on the toolbar .
Click to start, stop, slow forward, fast forward and turn audio on/off
respectively.
Slow forward is 1/2X, 1/4, 1/8X and 1/16X. Fast forward is 2X, 4X and 8X.