Manual

12 TVE-DEC10 IP Video Decoder User Manual

2. Select the channel to be decoded from the Decoding Channel drop-down

list.

3. Enter a dwell time in the Dwell Time box. This is the time in seconds that the

image is displayed before moving on to the next one.

4. Click Modify to define the channel parameters. In the window enter the

channel parameters:

Remote host IP address: Enter the IP address of the encoding device.

Remote host port: Enter the port of the encoding device.

Remote host channel: Enter the channel number of the encoding device to

be decoded.

User ID/password: Enter the user name and password used to log into the

encoding device.

Transmission protocol: Select the protocol for data transmission, either

TCP or UDP

Stream type: Select the stream type to decode, either main stream or sub-

stream.

Note: Up to 64 cameras can be decoded in sequence.

5. Click Confirm to save the settings and return to the previous window.

Remote playback

Use this function to remotely access the encoder to stream and decode stored

files for local output. The encoder must have storage capabilities.

To set up remote playback:

1. Click Decoding Operation > Decode Mode > Remote playback. The

Remote Playback window appears.