Manual

TVE-DEC10 IP Video Decoder User Manual 11
To set up dynamic decoding:
1. Click Decoding Operation > Decoding Mode > Dynamic Decoding. The
Dynamic Decoding window appears.
2. Enter the channel parameters:
Decoding channel: Select the decode channel
Remote host IP address: Enter the IP address of the encoding device.
Remote host port: Enter the port of the encoding device.
Remote host channel: Enter the channel number of the encoding device to
be decoded.
User ID/password: Enter the user name and password used to log into the
encoding device.
Transmission protocol: Select the protocol for data transmission, either
TCP or UDP.
Stream type: Select the stream type to decode, either main stream or sub-
stream.
3. Click Start to start decoding.
Sequence mode
You set up the decoder so that the decoded images of multiple streams from a
camera are automatically sequenced with a set dwell time between each image.
To set up the decoding sequence:
1. Click Decoding Operation > Decode Mode > Sequence Decoding. The
Circular Decoding window appears.