User Manual

4 TVE-120-420-820-1620 Encoder User Manual
Introduction
The TruVision TVE H.264 IP video encoder converts the analog camera signal to
compressed IP video streams. These streams are transited to TruVision network video
recorders (NVR) or digital video recorders (DVR) for remote storage, live-view and
playback purpose.
This user manual provides basic information on setting up and using the TVE-120,
TVE-420, TVE-820 and TVE-1620 models.
The encoder is shipped with web browser menus in 12 languages: English, Simplified
Chinese, Dutch, Finnish, French, German, Italian, Polish, Portuguese, Russian,
Spanish, and Turkish.
Package contents
The TruVision TVE-xx20 IP video encoder is shipped with the following items:
• TVE encoder
• Power adaptor (8-ch and 16-ch encoder models only)
• Power cable (8-ch and 16-ch encoder models only)
• 19” rack brackets (8-ch and 16-ch encoder models only)
• Quick start guide
The user manual and quick start guide are available from our web sites. They are
available in several languages.
Key features
The following key features are supported by TVE encoders:
• 1/4/8/16-channel H.264 encoding with dual stream output
• Multiple resolution options: 960H, 4CIF, 2CIF, CIF and QCIF
• Support audio & video compounded stream
• Device-configurable remote recording on NAS (Network Attached Storage)
• Flexible and powerful recording mechanism when used in combination with a
network storage device (NAS): Scheduled, event triggered, alarm triggered, cycle
recording, pre and post recording
• Bi-directional audio
• PTZ control via RS-485 port
• Alarm input and output
• Support ONVIF, PSIA and CGI communication
• Discoverable via the TruVision Device Manager Tool