User Manual

62 TVE-120-420-820-1620 Encoder User Manual
2. Connect the USB device to the recorder if the upgrade firmware file is stored here.
3. From the menu toolbar, click Configuration and then Remote Configuration >
Device Management > Configuration Files. The Configuration Files window
appears.
4. Click Browse to locate the file on your computer or USB device to upload to the
encoder.
5. Select the firmware file and click Upgrade. Click Yes to begin the upgrade process.
The encoder will reboot automatically once the firmware is installed.
Note: The upgrading process can take between 5 and 10 minutes. Do not turn off
the power.
Holiday settings
You can create a separate recording schedule for holidays. Once one or more holidays
are created, a separate entry for holiday will be included in the recording schedule
(refer to “Recording settings” on page 48)
To set up a holiday recording schedule:
1. From the menu toolbar, click Configuration and then Remote Configuration >
Device Management > Holiday. The Holiday Parameters window appears.
2. Select a holiday period from the list (such as Holiday1) and click its Edit button to
modify the settings. The Edit window appears.
Enter the name of the holiday period and select Enable Holiday. Select whether the
holiday period will be categorized by date, week, or month and then enter the start
and end dates.
3. Click OK save the settings and to return to the Holiday Parameters window.
4. Repeat steps 2 for other holiday periods.
5. Click Save to save the settings.