User Manual

60 TVE-120-420-820-1620 Encoder User Manual
Import/export configuration files, restart device and restore
default settings
You can export and import configuration settings from the encoder. This is useful if you
want to copy the configuration settings to another device, or if you want to make a
backup of the settings.
You cannot import a configuration file if the firmware version of the encoder has in the
meantime changed.
Figure 11: Configuration files window
Option Description
1.
Restart
Restart the device.
2.
Restore
Restore all the encoder’s
parameters except network settings to default
factory settings. Network information such as IP address, subnet mask,
gateway, MTU, NIC working mode, server port, and default router are
not restored to factory default settings.
3.
Default
Restore all the encoder’s parameters to default factory settings.
4.
Import
and export
parameters
Import and export the configuration settings of the encoder. This is
useful if you want to copy the configuration settings to another device,
or if you want to make a backup of the settings.
Note: Only the administrator can import/export configuration files.
To restart the encoder:
1. From the menu toolbar, click Configuration and then Remote Configuration >
Device Management > Configuration Files. The Configuration Files window
appears.
2. Click the Restart button to reboot the device.
3. Click OK in the pop-up message box to confirm reboot operation.
The system will automatically restart.