User Manual

58 TVE-120-420-820-1620 Encoder User Manual
Device management
This chapter describes how to:
 Set up the time and date of the recorder
 Select the recorder language and set up general system parameters such as the
device name, menu timeout period, and enable/disable password requirement
 Import/export configuration files
 Upgrade the firmware
 Set up holiday periods
 Configure RS-232 settings
 Enable protocols
Time and date settings
You can set up the date and time that will appear on-screen as well as on time stamped
recordings. The start and end time of daylight saving time (DST) in the year can also be
set. DST is deactivated by default. See Figure 10 below for the Time & Date settings
window.
Figure 10: Time and Date Settings window
Option Description
1.
Time Zone
Select a time zone from the list.
2.
System Time
Displays the current system date and time.
3.
Set
Time Enter the system date and time from the calendar. You can enable
“Sync with computer time”.
4.
Auto DST Adjustment
Enable to activate DST is automatically. It depends on the time zone
selected.
Default is Disabled.