User Manual

56 TVE-120-420-820-1620 Encoder User Manual
Under Alarm Linking, check one of more of the desired response methods:
- Enable Alarm Audio: Record audio with the video.
- Notify Alarm Host: Send a notification or alarm signal to remote alarm host
when an event occurs. The alarm host refers to the computer installed with
remote client software
- Send Email: Send an email with alarm information to a user or users when an
event occurs.
Under Trigger Alarm Output select one of more alarm outputs to trigger an
external alarm when a motion detection event occurs. See “Alarm output settings”
on page 51 on how to set up an external alarm output.
6. Under Copy to Camera, select the other cameras to which to copy this schedule.
7. Click Save to save the settings.
Alarm host setup
If an alarm host is set, the encoder sends a signal to the host when an alarm is
triggered. The remote alarm host must have the TruVision Navigator server software
installed.
To set up a remote alarm host:
1. From the menu toolbar, click Configuration and then Remote Configuration >
Alarm & Event Setup > Alarm Host Setup. The Alarm Host Setup window
appears.
2. Enter Alarm Host IP and Alarm Host Port values.
Alarm host IP represents the IP of the remote PC where the Network Video
Surveillance software installed. The alarm host port value must be the same as