User Manual

TVE-120-420-820-1620 Encoder User Manual 53
Manual trigger
The manual trigger menu allows you to manually trigger outputs of the encoder.
To trigger or clear alarm outputs manually:
1. From the menu toolbar, click Configuration and then Remote Configuration >
Alarm & Event Setup > Manual Trigger. The Manual Trigger window appears.
2. Select the desired alarm output and click the following buttons:
Trigger / Trigger All: Trigger an alarm output or trigger all alarm outputs.
Clear All: Stop all alarm outputs at once.
Notifications
You can select the alarm and event notifications to be included in the event hint icon of
the alarm center displayed in live view. Clicking the icon opens the window of the alarm
center that lists the detected alarm and event notifications.
To set up event notifications:
1. From the menu toolbar, click Configuration and then Remote Configuration >
Alarm & Event Setup > Notifications. The Notifications window appears.
2. Click the Event Hint Settings button. The notifications list appears. Select the
desired notifications.
• HDD Full: All installed HDDs are full and will not record any more video.
• HDD Error: Errors occurred while files were being written to the storage, there is
no storage, or the storage had failed to initialize.
• Network Disconnected: Disconnected network cable.