User Manual

46 TVE-120-420-820-1620 Encoder User Manual
To enable UPnP:
1. Connect the encoder to the router.
Note: The router must support UPnP and this option must be enabled.
2. From the menu toolbar, click Configuration and then Remote Configuration >
Network Settings > UPnP. The UPnP window appears.
3. Select Enable UPnP. It is disabled by default.
4. From Mapped Type, select Auto or Manual.
If Manual is selected, enter the external ports and IP addresses required. To
change the values, click the current value in the table and enter the new value.
5. Click Save to save the settings.
HTTPS settings
HTTPS (Hyper Text Transfer Protocol Secure) ensures the data transferred is
encrypted using Secure Socket Layer (SSL) or Transport Layer Security (TLS). HTTPS
provides authentication of the web site and associated web server that one is
communicating with and create a secure channel over an insecure network.
To configure HTTPS settings:
1. From the menu toolbar, click Configuration and then Remote Configuration >
Network Settings > HTTPS. The HTTPS window appears.
2. Select the desired certificate option:
• Create self-signed certificate
Under Create Self-signed Certificate click the Create button. Enter the country,
host name/IP, validity and other information. Click OK to save the settings.
- or -
• A signed certificate is available, start the installation directly
- or -
• Create the certificate request first and continue the installation
3. Click Save to save the settings.
IP address filter settings
You can define the list of forbidden or allowed IP camera addresses that can be
accessed by the encoder. This lets you select who can access the system, increasing
the system’s security. The function is disabled by default.
To configure IP Address Filter settings:
1. From the menu toolbar, click Configuration and then Remote Configuration >
Network Settings > IP Address Filter. The IP Address Filter window appears.
2. Select Enable IP Address Filter. It is disabled by default.