User Manual

42 TVE-120-420-820-1620 Encoder User Manual
To configure email settings:
1. From the menu toolbar, click Configuration and then Remote Configuration >
Network Settings > Email. The Email window appears.
2. Enter the required settings.
Option
Description
Sender
Enter the name of the sender of the email.
Sender’s address
Enter the sender’s email address.
SMTP server
Enter the SMTP server’s IP address.
SMTP port
Enter the SMTP port. The default TCP/IP port for SMTP is 25.
Enable SSL/TLS
Select the check box to enable TLS and encrypt emails. If the
destination server does not support TLS, the encoder will default to
SSL.
If disabled, emails will not be encrypted and will be sent in clear text.
Include Snapshot
Select the check box if you want to send email with attached alarm
JPEG images.
Interval
The interval represents the time range in seconds between the alarm
images being sent. For example, if you set the interval at two seconds,
the second alarm image will be sent two seconds after the first alarm
image.
Enable Server
Authentication
If your mail server requires authentication, select this check box to use
authentication to log in to this server and enter the login User Name
and Password.
User Name
If the mail server requires authentication, enter the login user name.
Password
If the mail server requires authentication, enter the login password.
Confirm
Confirm password.
Receiver
Select an email recipient. Up to three receivers can be selected.
Receiver’s address
Enter the email address of the receiver.
3. Click Test to the test email settings.
Note: We recommend that you test the email settings after entering values in the
email window.
4. Click Save to save the settings.
802.1X settings
The IEEE 802.1X standard is supported by the network cameras, and when the feature
is enabled, the camera data is secured and user authentication is needed when
connecting the camera to the network protected by the IEEE 802.1X.
To use 802.1X with the encoder, the network switch needs to also to support 802.1X.