User Manual

40 TVE-120-420-820-1620 Encoder User Manual
Option Description
19.
HTTPS Port
HTTPS (Hypertext Transfer Protocol Secure) is a secure protocol that
provides authenticated and encrypted communication. It ensures that
there is a secure private channel between the encoder and cameras.
The default value is 443.
3. Click Save to save the settings.
PPPoE settings
Although not usually used, you can connect the encoder directly to a DSL modem. To
do this, you need to select the PPPoE option in the network settings. Contact your ISP
to get the user name and password.
Note: The encoder will automatically reboot after enabling or disabling the PPPoE
function.
To configure PPPoE settings:
1. From the menu toolbar, click Configuration and Remote Configuration > Network
Settings > PPPoE. The PPPoE window appears.
2. Select Enable PPPoE. It is disabled by default.
3. Enter the dynamic IP address, your user name and password. Confirm the
password.
4. Click Save to save the settings.
DDNS settings
If the encoder is set up to use PPPoE as its default network connection, configure the
Dynamic DNS (DDNS) to be used in conjunction. You need to register with your ISP
before configuring your system for use with DDNS.
To set up DDNS:
1. From the menu toolbar, click Configuration and then Remote Configuration >
Network Settings > DDNS. The DDNS settings window appears.
2. Select Enable DDNS.
3. Select one of the three DDNS types listed:
• DynDNS: Enter the server address for DynDNS (i.e. members.dyndns.org). In
the DVR Domain Name field, enter the domain obtained from the DynDNS web
site. Then enter the user name and password registered in the DynDNS network.
• NO-IP server: Enter the server address for IPServer as well as the host name,
user name and password.
• ezDDNS: Enter the host name. It will automatically register it online. This is the
default option.
4. Click Save to save the settings.