User Manual

38 TVE-120-420-820-1620 Encoder User Manual
Network settings
You must configure your encoder’s network settings before using it over the network.
Network settings
Note: As every network configuration may differ, please contact your Network
Administrator or ISP to see if your encoder requires specific IP addresses or port
numbers.
To configure general network settings:
1. From the menu toolbar, click Configuration and then Remote Configuration >
Network Settings > Network Settings. The Network Settings window appears.
2. Enter the required settings:
Option Description
1.
NIC Type
Network interface card (NIC) is a device used to connect the encoder to a
network. Select the NIC type used from the drop-down list.