User Manual

36 TVE-120-420-820-1620 Encoder User Manual
- Enable Alarm Audio: Record audio with the video.
- Notify Alarm Host: Send a notification or alarm signal to remote alarm host
when an event occurs. The alarm host refers to the computer installed with
remote client software
- Send Email: Send an email with alarm information to a user or users when an
event occurs.
Under Trigger Alarm Output select one of more alarm outputs to trigger an
external alarm when a motion detection event occurs. See “Alarm output settings”
on page 51 on how to set up an external alarm output.
Under Trigger Channel, select one or more channels to trigger recording when a
motion detection event occurs.
Select the PTZ control actions to link to the VCA event. Under PTZ Linking, select
the PTZ camera and enter the preset, preset tour, and/or a shadow tour to be
triggered when the alarm is detected. Select Enable to activate the option.
7. Click Save to save all the settings.
Sudden scene change
You can configure the camera to trigger an alarm when the camera detects a change in
the scene caused by a physical repositioning of the camera.
To setup sudden scene change actions:
1. From the menu toolbar, click Configuration and then Remote Configuration >
VCA > Sudden Scene Change. The Sudden Scene Change window appears.
2. Select a camera from the drop-down list.