User Manual

TVE-120-420-820-1620 Encoder User Manual 29
Select the check box alongside a text box for the text to be displayed on screen.
4. In the preview image you can adjust the text location on screen by moving the red
text frame.
5. If you want to copy the text overlay settings of the current camera to other cameras,
under Copy to Camera select the camera(s) to copy, or click Select All to select all
cameras.
6. Click Save to save the settings.
PTZ setup
Use the PTZ Setup menu to configure analog PTZ dome cameras. Each camera must
be set up individually. The cameras must be configured before they can be used.
HD-TVI PTZ cameras can be controlled over the coax cable.
Ensure that the PTZ dome cameras are correctly connected to the RS-485 port on the
back panel.
Note: If a camera does not work correctly after configuring the encoder, confirm the
parameters entered.
To configure PTZ dome camera settings:
1. Click the PTZ Control icon on the live view toolbar.
— or —
Click Configuration > Remote Configuration > Camera Setup > PTZ Setup. The
PTZ Setup window appears.
2. Select the camera, baud rate, data bit, stop bit, parity, flow control, PTZ protocol and
PTZ address for the camera.