User Manual

28 TVE-120-420-820-1620 Encoder User Manual
Under Alarm Linking, check one of more of the desired response method:
- Enable Alarm Audio: Enable the buzzer.
- Notify Alarm Host: Send a notification or alarm signal to remote alarm host
when an event occurs. The alarm host refers to the computer installed with
remote client software
- Send Email: Send an email with alarm information to a user or users when an
event occurs.
Under Trigger Alarm Output select one of more alarm outputs to trigger an
external alarm when a motion detection event occurs. See “Alarm output settings”
on page 51 on how to set up an external alarm output.
7. If you want to copy the tamper settings of the current camera to other cameras,
under Copy to Camera select the camera(s) to copy, or click Select All to select all
cameras.
8. Click Save to save the settings.
Text overlay
You can add up to eight lines of text on screen. This option can be used, for example,
to display emergency contact details.
To add a text overlay:
1. From the menu toolbar, click Configuration and then Remote Configuration >
Camera Setup > Text Overlay. The Text Overlay window appears.
2. Select a camera from the drop-down list.
3. Enter the user-defined text content. Up to six character strings can be edited.