User Manual

TVE-120-420-820-1620 Encoder User Manual 27
2. Select a camera from the drop-down list. Each camera must be set up individually.
3. Select the Enable Camera Tamper check box.
4. Under the Area Settings tab, the whole screen is set for tamper-proof detection by
default. This cannot be changed. Drag the Sensitivity scroll bar to the desired
sensitivity level.
5. Select the Arming Schedule tab to modify the arming schedule for video loss
detection. The configuration is the same as that for motion detection (see “Motion
detection” on page 22).
You can schedule only one time period in a day. Default is 24 hours.
6. Click the Actions tab.