User Manual

26 TVE-120-420-820-1620 Encoder User Manual
To configure a privacy mask:
1. From the menu toolbar, click Configuration and then Configuration > Remote
Configuration > Camera Setup > Privacy Mask. The Privacy Mask window
appears.
2. Select a camera from the drop-down list. Each camera must be set up individually.
3. Select the Enable Privacy Mask check box.
4. Click the Draw Area button to start drawing a block on an area.
5. Using the mouse, click and drag a privacy-mask box in the camera view screen over
the desired area. You can set up to four areas for privacy masking.
6. Click Stop Draw when completed. Click Clear to clear the screen.
7. If you want to copy the privacy mask settings of the current camera to other
cameras, under Copy to Camera select the camera(s) to copy, or click Select All to
select all cameras.
8. Click Save to save the settings.
Camera tamper
Video tampering, such as moving a camera to a different position, can also be detected
and set to trigger an action on the encoder.
Note: It is strongly recommended not to configure for video tampering when using PTZ
dome cameras.
To configure tamper-proof detection:
1. From the menu toolbar, click Configuration and then Remote Configuration >
Camera Setup > Camera Tamper. The Camera Tamper window appears.