User Manual

TVE-120-420-820-1620 Encoder User Manual 25
Under Alarm Linking, check one of more of the desired response methods:
- Enable Alarm Audio: Enable the buzzer.
- Notify Alarm Host: Send a notification or alarm signal to remote alarm host
when an event occurs. The alarm host refers to the computer installed with
remote client software
- Send Email: Send an email with alarm information to a user or users when an
event occurs.
- Upload Snapshot to FTP: Capture the image when an alarm is triggered and
upload the picture to a FTP server.
Under Trigger Alarm Output select one of more alarm outputs to trigger an
external alarm when a motion detection event occurs. See “Alarm output settings”
on page 51 on how to set up an external alarm output.
Under Trigger Channel, select one or more channels to trigger recording when a
motion detection event occurs.
9. If you want to copy the motion detection settings of the current camera to other
cameras, under Copy to Camera select the camera(s) to copy, or click Select All to
select all cameras.
10. Click Save to save settings.
Privacy masking
You can define an area on screen to remain hidden from view. For example, you can
choose to block the view of a camera when overlooking residential premises. This
hidden area is referred to as privacy masking. Privacy masking cannot be viewed in live
view or recorded mode, and appears as a blank area on the video image.