User Manual

TVE-120-420-820-1620 Encoder User Manual 23
2. Select a camera from the drop-down list. Each camera must be set up individually.
3. Select Enable Motion Detection.
4. Select the Enable Dynamic Analysis check box. When enabled, the motion
detection triggered frame (green) of the moving targets in the motion detection area
will be displayed on the live video.
5. Select the area sensitive to motion and its sensitivity level.
Select the Area Settings tab. Click Start Draw. Click and drag the mouse cursor
across the screen. The area selected appears as a red grid. Areas covered by the
red grid are sensitive to motion detection. Up to eight areas can be drawn. Click
Stop Draw when completed. Click Erase to deselect an area. Click Clear to clear
the screen.
Drag the Sensitivity scroll bar to the desired sensitivity level.
Click Save to save the settings.
6. If you want to copy the motion detection settings of the current camera to other
cameras, under Copy to Camera select the camera(s) to copy, or click Select All to
select all cameras.
7. Select the recording schedules for motion detection.
Click the Arming schedule tab.