User Manual

22 TVE-120-420-820-1620 Encoder User Manual
3. Select the type of scene: Standard, Indoor, Outdoor, or Dim Light.
4. Move the slider to adjust the brightness, contrast, saturation, hue, sharpness, and
digital noise reduction.
5. Click Save to save the settings.
Motion detection
The encoder can be set up to trigger an alarm if it detects motion, which can then be
recorded, for example on a network storage device. You can then search these
recorded motion activities for specific incidents.
Select the level of sensitivity to motion so that only objects that could be of interest can
trigger a motion recording. For example, recording is triggered by the movement of a
person but not that of a cat.
To configure motion detection:
1. From the menu toolbar, click Configuration and then Remote Configuration >
Camera Setup > Motion Detection. The Motion Detection window appears.