User Manual

TVE-120-420-820-1620 Encoder User Manual 21
2. Select a camera from the drop-down list.
3. Edit the camera name in Camera Name.
4. Select to display the camera name as well as the date and/or day.
5. Select the date format, time format, and OSD display mode. The default OSD
display mode is Not Transparent & Not Flashing.
6. On the live image, you can adjust the OSD text location on screen by moving the
red text frames.
7. If you want to copy the display settings of the current camera to other cameras, go
to the Copy to Camera panel and select the camera(s) to copy, or click Select All
to select all cameras.
8. Click Save to save the settings.
Image adjustment
You can manually adjust the brightness, contrast, saturation, hue, sharpness and digital
noise reduction values of the camera image to get the best image quality.
To configure the image settings:
1. From the menu toolbar, click Configuration and then Remote Configuration >
Camera Setup > Image Adjustment. The Image Adjustment window appears.
2. Select a camera from the drop-down list.