User Manual

20 TVE-120-420-820-1620 Encoder User Manual
Stream Type: Select the video type to video stream, or video & audio composite
stream. The audio signal will be recorded only when the video type is Video &
Audio.
Resolution: Select the resolution of the video input.
Bitrate Type: Select the bitrate type to constant or variable. When Variable is
selected, six levels of video quality can be configured.
Video Quality: Select the video quality level. Default is Medium.
Frame Rate: Select the recording frame rate.
The frame rate used to describe the frequency at which a video stream is updated is
measured in frames per second (fps). A higher frame rate is advantageous when
there is movement in the video stream, as it maintains image quality throughout.
Max. Bitrate Mode: Select the general (Default) or customized option.
Max. Bitrate: Set the maximum bitrate between 32 and 8192 Kbps.
Video Encoding: Select the video encoding standard to H.264 or H.265.
6. If you want to copy the display settings of the current camera to other cameras, go
to the Copy to Camera panel and select the camera(s) to copy, or click Select All
to select all cameras.
7. Click Save to save the settings.
Camera OSD
You can configure which information is displayed on-screen. The on-screen display
(OSD) settings appear in live view and recording modes and include the camera name,
time and date. You can also adjust the transparency of the OSD relative to the
background so that it is easier to read or is less prominent on screen.
To configure the OSD settings:
1. From the menu toolbar, click Configuration and then Remote Configuration >
Camera Setup > Camera OSD. The Camera OSD window appears.