User Manual

TVE-120-420-820-1620 Encoder User Manual 19
Camera configuration
Use the Camera Setup menu under Remote Configuration to configure analog
cameras. You can also configure the camera OSD, recording settings, image quality,
motion detection, privacy masking, camera tampering, text overlay, and PTZ
configuration.
Camera recording settings
You can adjust the video streaming parameters to obtain the image quality and file size
best suited to your needs.
To configure video settings:
1. From the menu toolbar, click Configuration and then Remote Configuration >
Camera Setup > Camera Recording Settings. The Camera Recording Settings
window appears.
2. Select a camera from the drop-down list.
3. Select the Stream Record Mode of the camera: Main Stream (TL-Hi), Main Stream
(TL-Lo), Main Stream (Event), Main Stream (Alarm), or Substream.
The main stream is usually for recording and live viewing with good bandwidth, and
the substream can be used for live viewing when the bandwidth is low. Refer to
“Browser configuration” on page 11 on how to change main stream to substream for
live viewing.
4. You can customize the following parameters for the selected Main Stream or
Substream: