User Manual

14 TVE-120-420-820-1620 Encoder User Manual
Name Description
Click to switch to full screen mode.
5
. Video function
toolbar
Pause
/
Click to start/stop all viewing.
/
Click to manually start/stop recording video. The recording is
saved on the computer.
Enable e-PTZ (must be supported by the connected camera).
Click to capture a snapshot of a video image. The image is
saved on the computer.
Click to display the previous camera view.
Click to display the next camera view.
/
Click to turn audio on/off.
/
Start/Stop bi-directional audio.
6
. Alarm Trigger Output Turn Alarm Output on/off.
7
. PTZ control panel Control PTZ of the currently selected camera, adjust the speed of PTZ
movement and turn on/off the camera light and wiper.
8
. Preset setup /
selection
Set up and select presets.
To see live view:
1. Open the encoder’s web browser screen. See Figure 6.
2. Double-click a camera from the device list to select a camera to view.
3. Click the Display Format button to view multiple video tiles.
Capture a snapshot
In live view mode, click the snapshot button on the video function toolbar to capture live
pictures. A pop-up message will appear on screen to confirm that the capture was
successful. The image is saved as a JPEG file on the computer.
Note: Configure where the snapshots are saved on your computer in the Configuration
> Browser Configuration menu on page 11.