User Manual

TVE-120-420-820-1620 Encoder User Manual 11
Browser configuration
There are two main configuration menus in the in the menu toolbar:
 Browser Configuration
 Remote Configuration
Use the Browser Configuration menu to manage the protocol type, live view
performance and local storage paths. In the Configuration panel, click Browser
Configuration to display the browser configuration window. See Figure 5 below for
descriptions of the different menu parameters.
Use the Remote Configuration menu to configure the camera, VCA, network settings,
recording, alarm and events setup, device management, user management, and to see
system information. These functions are described in the subsequent chapters.
Figure 5: Browser configuration window
Parameters Description
Live View Parameters
1.
Protocol
Specify the network protocol used: TCP, UDP or MULTICAST.
2.
Stream Type
Select the type of stream: Mainstream or Substream.
3.
Multiscreen Display
Select the monitor display: Full screen, 4:3, or 16:9.
4.
Video File Size
Specify the maximum file size.
Options include: 256 MB, 512 MB and 1G.
5.
Latency
Specify the transmission speed.
Options include: Shortest Delay, Auto or Fluent.
6.
Auto
Start Live View If enabled, automatically start all the live views when the users
navigate to Live View tab.