User Manual

8 TVE-120-420-820-1620 Encoder User Manual
Getting started
All encoder configuration and control is done via the webpage. Before you start using
the encoder, you must first activate the device by setting up a strong password.
Default network settings
The default network settings are:
• IP address - 192.168.1.70
• Subnet mask - 255.255.255.0
• Gateway address - 192.168.1.1
• HTTP port: 80
• Server: 8000
When you first start up the device, the Activation window appears. You must define a
high security admin password before you can access the device. There is no default
password provided.
Tips on creating a strong password:
• A valid password range must be between 8 and 16 characters. You can use a
combination of numbers, lower and upper case letters, and special characters: _ - , *
& @ / $ ? Space. The password must contain characters from at least two of these
groups.
• The password is case-sensitive so use a mixture of upper and lower case letters.
• Do not use personal information or common words as a password
User Name: It is always “admin”. It cannot
be changed. The bar showing password strength
Enter the new admin password and confirm it.