Installation Manual

4 / 4 P/N 1073110-EN • REV C • ISS 02FEB17
Power a 24 VAC camera:
Heater
Fan
24 VAC camera power
supply
24 VAC input
3. When you have completed connecting the
cables, power on the housing, adjust the lens
to zoom and focus.
Zoom
Focus
4. Close the cover of the housing and fasten the
clamps to finish the installation.
Specifications
Dimensions (L × W × H)
445.3 × 169.2 × 110 mm
(17.5 × 6.7 × 4.3 in )
Weight
1900 g (4.2 lbs.)
Working temperature
-40 to +60 ℃ (-40 to +140 °F )
Temperature control
Heater on: 5 ℃ ±5 ℃
, fan operating
for constant temperature;
Fan on: 40 °C ±5 ℃, for heat
dissipation
Power
supply 24 VAC 4 A. Purchased separately.
Power consumption
40 W max.
Environmental rating
IP66
Legal and regulatory
information
Trademarks and
patents
The trade names used in this document may
be trademarks or registered trademarks of the
manufacturers or vendors of the respective
products.
Certification
Copyright
©
2017 United Technologies Corporation. All
rights reserved.
Interlogix is part of UTC
Climate, Controls & Security, a unit of United
Technologies Corporation.
Contact information
For contact information, see www.interlogix.com or
www.utcfssecurityproducts.eu.