Installation Guide

10 Installation Guide
CAUTION: Use direct plug-in UL listed power supplies
marked Class 2/CE certified or LPS (limited power source) of
the required output rating as listed on the unit.
CAUTION: Risk of explosion if the battery is replaced by an
incorrect type. Dispose of used batteries according to the
instructions.
Cable requirements
For proper operation, adhere to the following cable and power
requirements for the cameras. Category 5 cabling or better is
recommended. All network cabling must be installed according
to applicable codes and regulations.
Table 1 below lists the requirements for the cables that
connect to the camera.
Table 1: Recommended power cable requirements
Box camera
: 12 VDC/24 VAC power wires or PoE
(802.3af)
VF
bullet camera:
VF
mini dome:
12 VDC power wires or PoE+ (802.3at)
12 VDC power wires or PoE (802.3af)
VF
outdoor dome: 12 VDC/24 VAC power wires or PoE+
(802.3at)