Spec Sheet

GE
Security
imagination at work
imagination at work
Related Diagram
Ordering Information
Use the Configurators below to select the options available for these products.
Specifications
Video S731DV (Multimode) S7731DV (Single Mode)
Channels 1 simplex
Format NTSC and PAL
Input/Output Signal 1.0 V pk - pk composite
Bandwidth 6.5 MHz
Signal-to-Noise Ratio >55 dB
Video Resolution 520 TV lines
Input/Output Impedance 75 ohms
Differential Phase <3°
Differential Gain 3%
Data
Channels 1 simplex (RX to TX)
Formats RS-232 (3-wire/5-wire), TTL, RS-422, RS-485 (2-wire), Manchester,
Biphase, SensorNet
Baud Rate 250 kbps to 512 kbps (depending on data format)
Relay/Contact Closure 1 simplex channel (TX to RX)
Relay/Contact Rating 0.5 A at 30 VDC 0.5 A at 30 VDC
Bit Error Rate <1.0E-9
Optical
Mode Multimode Single Mode
Optical Budget∗ 13 dB 18 dB
Emitter LED Laser
Wavelength 850 nm and/or 1300 nm
(depending on model)
1310 nm and/or 1550 nm
(depending on model)
Operating Distance∗∗ Up to 3.2 mi (5.2 km)
(depending on model)
Up to 37 mi (60 km)
Launch Power -15 dBm -10 dBm
Receiver Sensitivity -28 dBm
Gain Control Optical Automatic Gain Control (OAGC)
Electrical
Input Power, Standalone Units 24 VAC or 13.5 VDC regulated
Input Power, Rack Units 13.5 VDC regulated
Current Requirement 450 mA
Power Consumption 6 W
Power Factor 4 (rack units only)
Protection Solid-state short circuit protection
Power Supply Model 613P (optional)
Environmental
Operating Temperature -40 to 167 °F (-40 to 75 °C)
Maximum Humidity 95% relative, noncondensing
Mechanical
Dimensions (LWD), Standalone
Units
5.0” x 4.8” x 1.5” (127 x 122 x 38 mm)
Dimensions, Rack Units 1 slot (1.0”)
Weight Standalone 1.20 lbs (0.55 kg); Rack 0.6 lbs (0.27 kg)
Construction Polycarbonate (standalone); Aluminum (rack)
Optical Fiber
Transmitter
Receiver
Video In
Data Out
Contact In
Video Out
Data In
Contact Out
613P Power Supply (2 included with S731DV-PKG)
Input Power 100 - 240 VAC, 60/50 Hz
Output Voltage 13.5 VDC regulated
Output Current 1.3 A maximum
Power Consumption 18 W
AC Connection Connects to standardwall outlet
Dimensions 1.27” x 2.3” x 4.35”
Weight 0.79 lbs (0.36 kg)
Includes a standalone multimode transmitter, a stand-
alone multimode receiver, and two power supplies.
imagination at work
U.S.
T [phone]
T 888-GE-SECURITY
888-(437-3287)
F 561 998 6224
Canada
T 519 376 2430
F 519 376 7258
Asia
T 852-2907-8108
F 852-2142-5063
Australia
T 61-3-9239-1200
F 61-3-9239-1299
Europe
T 32-2-719-9847
F 32-2-719-9846
Latin America
T 305-593-4301
F 305-593-4300
www.gesecurity.com
© 2005 General Electric Company
All Rights Reserved
As a company of innovation, GE Security reserves the right to change product specifications without notice. For the latest product specifications, visit GESecurity online at www.GESecurity.com or contact your GE Security sales representative.
S731DV-2006-09-2
∗ Optical Budget based on 62.5 μm fiber, for 50/125 μm fiber subtract 3 dB.
∗∗ Operating distance is approximate and assumes best fiber. It will be affected by the type and number of splices in the fiber. Refer to update No. TB00-005, which can be found at www.gesecurity.com