Spec Sheet

GE
Security
imagination at work
Related Diagram
Ordering Information
Use the Configurators below to select the options available for these products.
Specifications
Data S714D (Multimode) S7714D (Single Mode)
Channels 1 duplex
Formats 100Base-T Fast Ethernet, 10Base-T Ethernet
Baud Rate Compliant with IEEE 802.3
Bit Error Rate <1.0E-10
Optical
Mode Multimode Single Mode
Optical Budget* 13 dB 18 dB
Emitter VCSEL
Wavelength 850 nm and/or 1300 nm
(depending on model)
1310/1550 nm
(depending on model)
Operating Distance**
(depending on model and the timing characteristics of the
input data signal)
Transmitter Launch Power >-10 dBm >-6 dBm
Receiver Sensitivity <-23 dBm <-24 dBm
Gain Control Optical Automatic Gain Control (OAGC)
Electrical
Input Power 13.5 VDC regulated
Current Requirement 300 mA
Power Consumption 4.2 W
Power Factor 3
Protection Solid-state short circuit protection
Optional Power Supply Model 613P
Environmental
Operating Temperature -40 to 167 °F (-40 to 75 °C)
Maximum Humidity 95% relative, noncondensing
Mechanical
Dimensions (LWD), Standalone Units 5.0” x 2.8” x 1.5” (127 x 71 x 38 mm)
Dimensions, Rack Units 1 slot (1.0”)
Weight Standalone 0.67 lbs (0.31 kg); Rack 0.55 lbs (0.25 kg)
Construction Polycarbonate (standalone); Aluminum (rack)
100Base-T
Data
In/Out
100Base-T
Data
In/Out
Optical Fiber
Transmitter
Receiver
U.S.
T [phone]
T 888-GE-SECURITY
888-(437-3287)
F 561 998 6224
Canada
T 519 376 2430
F 519 376 7258
Asia
T 852-2907-8108
F 852-2142-5063
Australia
T 61-3-9239-1200
F 61-3-9239-1299
Europe
T 44-113-238-1668
F 44-113-253-8121
Latin America
T 305-593-4301
F 305-593-4300
www.gesecurity.com
© 2005 General Electric Company
All Rights Reserved
Up to 11 mi (18 km) Up to 28 mi (45 km)
As a company of innovation, GE Security reserves the right to change product specifications without notice. For the latest product specifications, visit GESecurity online at www.GESecurity.com or contact your GE Security sales representative.
S714D-2006-09-2
* Optical Budget based on 62.5 µm fiber, for 50/125 µm fiber subtract 3 dB.
** Operating distance is approximate and assumes best fiber. It will be affected by the type and number of splices in the fiber. Refer to update No. TB00-005, which can be found at www.gesecurity.com