Data Sheet

ManualsBrandsInterlogix ManualsAccess ControlRequest To Exit Dual Tech Sensor - Black

The RCR-REX is a dual technology, request-to-exit sensor used

for secure door egress and door access control. The RCR-REX

combines the power of passive infrared and Doppler range-

controlled radar technologies to provide the industry’s most

secure request-to-exit sensor.

Historically, request-to-exit sensors have not been used in sensitive

areas because they were easy to defeat. With the RCR-REX, dual

technology requires that both the unit’s PIR sensor and RCR sensor

detect intrusion activity in order to trigger the internal relay. For

maximum protection, adjust the radar so that the curtain is above

the ﬂ oor; objects slipped under the door will not activate the sensor,

making it virtually impossible to defeat.

The sensor has two detection patterns, the infrared PIR and the

Range Controlled Radar, that are adjusted independently. Radar

range can be adjusted from 3 to 15 feet (1 to 4.5 m) and can be

set to just above the ﬂ oor if desired.

Two Form C output relay contacts are used to switch a door lock

and shunt a door switch. The RCR-REX’s ﬂ exible lock relay may

be set to either Fail Safe or Fail Secure mode for operation when

the unit is not powered.

The user can determine lock relay activation times with easy-to-

change DIP switch settings. Factory default is 1/2 second, but

can be adjusted to 1, 2, 4, 8, 16, 32, or 64 seconds.

Depending on the settings chosen by the installer, when the

RCR-REX's sounder is turned on, it produces an audible tone

to warn of door-open-too-long (DOTL). Closing the door silences

the sounder, while new movement restarts the timer and resets

the sounder. A beeping tone will sound at the end of the external

input signal if the door is open.

OVERVIEW

An LED indicator turns red for the duration of the lock relay time

when motion is detected and ﬂ ashes twice per second during the

20-second warm-up period. It turns yellow when the radar detects

motion, and green when the passive infrared detects motion.

A tamper switch identiﬁ es when the housing cover is opened.

STANDARD FEATURES

• Proprietary dual technology—request-to-exit uses both RCR

and PIR to detect intruders

• Incorporates two Form C output relay contacts

• Tamper switch detects device open

• Includes mask for easy adjustment of PIR ﬁ eld of view

• Optional single gang wall plate

• Swing open design allows easy adjustment

• Housing available in white, gray, or black

• Built-in adjustable sounder for door position monitoring

• Wall or ceiling mount

• Dual relay outputs

interlogix.com

RCR-REX

Dual technology request-to-exit

motion sensor

Intrusion

Summary of content (2 pages)

PAGE 1
Intrusion RCR-REX Dual technology request-to-exit motion sensor OVERVIEW The RCR-REX is a dual technology, request-to-exit sensor used for secure door egress and door access control. The RCR-REX combines the power of passive infrared and Doppler rangecontrolled radar technologies to provide the industry’s most secure request-to-exit sensor. An LED indicator turns red for the duration of the lock relay time when motion is detected and ﬂashes twice per second during the 20-second warm-up period.
PAGE 2
North America T 855-286-8889 RCR-REX Latin America T 561-998-6114 Dual technology request-to-exit motion sensor Speciﬁcations Dimensional Diagram Electrical 7.395 in. (188 mm) Voltage 12 to 30VAC/VDC Current 23mA typical, 28mA max. @ 12VDC; 15mA typical, 17mA max. @ 24VDC; 31mA typical, 38mA max. at 12VAC; 26mA typical, 29mA max. at 24VAC Time delay 1/2, 1, 2, 4, 8, 16, 32, 64 sec. at ± 10%, selectable Loop type Open or Closed Max.