IFS POE302-SP Ethernet Splitter User Manual P/N 1076527 • REV A • ISS 08FEB12
Copyright Trademarks and patents Manufacturer Version Certification FCC compliance ACMA compliance European Union directives © 2012 UTC Fire & Security Company. All rights reserved. Interlogix, IFS POE302-SP Ethernet Splitter, the IFS Brand and logo are trademarks of UTC Fire & Security. Other trade names used in this document may be trademarks or registered trademarks of the manufacturers or vendors of the respective products. UTC Fire & Security Americas Corporation, Inc.
2002/96/EC (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see: www.recyclethis.info. Contact information Customer support www.utcfireandsecurity.com or www.interlogix.com www.interlogix.
Contents Package Contents 1 Product Features 1 Interface 1 PoE 1 Hardware 2 Standard Compliance 2 Product Overview 3 LED Indicator 3 Hardware Installation 3 Before Installation 4 PoE Injector and Splitter Installation 4 Connecting with other 802.
Package Contents Thank you for purchasing the IFS POE302-SP Gigabit High Power over Ethernet (IEEE 802.3at) Splitter. Open the package containing the Ethernet Splitter and carefully unpack it. The box should contain the following items: ● IFS POE302-SP x1 ● User Manual x1 ● 6 inch (15cm) UTP Straight Network Cable x1 ● DC Plug Cable x 2 If any of these items are missing or damaged, please contact your distributor or IFS Sales Rep.
• Auto-detect of PoE IEEE 802.3at equipment protects devices from being damaged by incorrect installation • Two adjustable output voltage options (12VDC/2A, 24VDC/1A) to fit various device power requirements • Distance of up to 100 meters Hardware • Metal case • 12V / 24V DIP switch • PoE Power in LED indicator Standard Compliance • IEEE 802.3 10Base-T • IEEE 802.3u 100Base-TX • IEEE 802.3ab 1000Base-T • IEEE 802.
Product Overview Figure 1 shows the front and side panels of the POE302-SP. Figure 1: POE302-SP Front and Side Panels LED Indicator POE302-SP LED indicator LED PoE In Color Function Green Steady on indicates the unit is receiving 56VDC PoE in-line power. Hardware Installation The POE302-SP operates at three different data rates 10Mbps, 100Mbps and 1000Mbps. The unit adjusts automatically to the incoming data rate. The following section describes the hardware features of the POE302-SP.
Before Installation The POE302-SP separates data and power and provides two DC power output options via a DIP switch.The two power options are shown below. • 12VDC/2A • 24VDC/1A Figure 2: Voltage output The default switch setting is 12V. Note: Please check the power requirements of the device that will be receiving its power from the POE302-SP.
Figure 3: Connection Schematic WARNING: The POE302-SP only accepts IEEE 802.3at equipment; other in-line power device may cause the POE302SP malfunction. 2. Connect the UTP cable in the package from "Ethernet” port of POE302-SP to the RJ-45 port of remote device. 3. Adjust proper DC power output and connect DC plug from "DC OUT" of POE302-SP to remote device. Caution: Please ensure the output voltage is correct for remote device. Otherwise, it will damage your remote device. 4.
Figure 4: Voltage output Note: With IEEE 802.3at Power over Ethernet; the POE302SP also can co-work with the IEEE 802.3at End-Span High Power over Ethernet Switch that is feeding power over pin 1, 2, and 3, 6.
Specifications POE302-SP Specifications Product POE302-SP Hardware Specification “Data” Out Port “PoE (Power + Interface Data)” Input Port DC Out Plug Connector LED Indicator Network Cable Data Rate DIP Switch Dimension (W x D x H) Weight Number of device can be powered Operating Temperature 1 x RJ-45 STP 1 x RJ-45 STP 1 System: PoE In x 1 (Green) 10Base-T: 2-Pair UTP Cat. 3, 4, 5, up to 100m (328ft) 100Base-TX: 2-Pair UTP Ca5, 5e, & 6 up to 100m (328ft) 1000Base-T: 2-Pair UTP Cat.
Contacting Technical Support Contact technical support if you encounter any difficulties during this installation. Please make sure you have the requested diagnostic or log files ready before you contact us by phone or go to www.interlogix.com/customer-support. Technical Support Europe, Middle East and Africa W Select Contact Us at www.utcfssecurityproducts.eu North America T +1 855.286.8889 E techsupport@interlogix.com Australia E 8 techsupport@interlogix.
