IFS POE302-MS Ethernet Injector User Manual P/N 1076517 • REV A • ISS 08FEB12
Copyright Trademarks and patents Manufacturer Version Certification FCC compliance ACMA compliance European Union directives © 2012 UTC Fire & Security Company. All rights reserved. Interlogix, IFS POE302-MS Ethernet Injector, the IFS Brand and logo are trademarks of UTC Fire & Security. Other trade names used in this document may be trademarks or registered trademarks of the manufacturers or vendors of the respective products. UTC Fire & Security Americas Corporation, Inc.
2002/96/EC (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see: www.recyclethis.info. Contact information Customer support www.utcfireandsecurity.com or www.interlogix.com www.interlogix.
Contents Package Contents 1 Product Features 1 Interface 1 PoE 1 Hardware 2 Standard Compliance 2 Product Overview 3 LED Indicators 3 Hardware Installation 3 Before Installation 3 Injector Installation 4 Injector and Splitter Installation 5 Specifications 7 Contacting Technical Support 8 IFS POE302-MS Ethernet Injector User Manual i
Package Contents Thank you for purchasing the IFS POE302-MS, an IEEE 802.3at High Power over Ethernet Injector. Open the package containing the Ethernet Splitter and carefully unpack it. The box should contain the following items: ● POE302-MS x1 ● User Manual x1 ● Power Cord x 1 If any of these items are missing or damaged, please contact your Interlogix reseller.
• Auto-detection of POE IEEE 802.3at equipment and devices to prevent damage caused by incorrect installation • Remote power feeding of up to 328 ft. (100m) Hardware • Metal Enclosure • LED indicators for Power and PoE in-use Standard Compliance • IEEE 802.3 10Base-T • IEEE 802.3u 100Base-TX • IEEE 802.3ab 1000Base-T • IEEE 802.
Product Overview Figure 1 shows the front and side panels of the POE302-MS. Figure 1: POE302-MS Front and Side Panels LED Indicators POE302-MS LED indicators LED Color PWR Green PoE In-use Green Function Lit indicates that the POE302-MS has power. Lit indicates that the PoE port is providing 56VDC in-line power.
Injector Installation 1. Connect the external power adaptor to the 56 VDC power connector of the POE302-MS. The power LED will be on in a steady state. (External power adapter is sold separately.) 2. Connect a standard network cable from the non-PoE switch or other network device to the “Ethernet” port of the POE302-MS. 3. Connect the long cable that will be used to connect to the remote POE PD device to the port “Ethernet + DC”. 4. Complying with the IEEE 802.
Injector and Splitter Installation 1. Connect the external power adaptor to the 56 VDC power connector of the POE302-MS. The power LED will be lit. 2. Connect a standard network cable from the “Ethernet+DC” port of the POE302-MS to the “PoE In” port of the POE302SP. The POE In-use LED of POE302-MS / POE302-SP will remain lit showing operation. 3. Connect a standard network cable from the non-PoE switch or other network device to the “Ethernet” port of POE302-MS. 4.
WARNING: Please ensure the output voltage is set correctly before applying power to remote device. Note: POE302-MS and POE302-SP can be installed in pairs. However, use of a third-party device is allowed if the device complies with IEEE 802.3at Power over Ethernet standard.
Specifications Ethernet Data Rate 10/100/1000Mbps Throughput (packet per second) 148810pps@64Bytes IEEE Standards IEEE 802.3 10Base T IEEE 802.3u 1000Base-TX IEEE 802.3ab 1000Base-T EIA/TIA 568 Standards IEEE 802.3at PoE+ Category cable 10 Base-T 2 pair UTP Cat 3,4,5 to 328ft (100m) 100 Base-TX 2 Pair UTP Cat 3,4,5,5e to 328Ft (100m) 1000 Base-T 2 Pair UTP Cat 5,5e,6 to 328ft (100m) EIA/TIA-568 100ohm STP (100m) Power Over Ethernet (PoE) PoE Standard IEEE 802.
Contacting Technical Support Contact technical support if you encounter any difficulties during this installation. Please make sure you have the requested diagnostic or log files ready before you contact us by phone or go to www.interlogix.com/customer-support. Technical Support Europe, Middle East and Africa W Select Contact Us at www.utcfssecurityproducts.eu North America T +1 855.286.8889 E techsupport@interlogix.com Australia E 8 techsupport@interlogix.
