Data Sheet

ManualsBrandsInterlogix ManualsAccessories communicationPOE201-MS/4

POE 201-MS/4

4-Port Fast Ethernet/PoE-af

Mid-span Injector

IFS Line / Network Transmission

interlogix.com

Overview

The IFS 4-Port Fast Ethernet/PoE-af Mid-span Injector is a quick

and easy solution that can be used when a network device does

not provide the functionality as a power source equipment (PSE),

such as a non-PoE switch, and yet several edge devices being

deployed are PoE powered devices (PD).

This module provides the ability to combine Ethernet data and PoE

on four individual category cables for deployment of up to four PoE

powered edge devices of up to 100m (328 ft.). This provides a cost-

effective and efﬁcient power distribution cable management solution

for a PoE-centric IP network.

The 100m (328 ft.) distance is based on the EIA-568 standard and

is the maximum distance between two Ethernet devices. The IFS

4-Port Fast Ethernet/PoE-af Mid-Span Injector can be deployed at

any location within the 100m (328ft.) cable run; however, typically

this device would be installed closer to the non-PoE device.

This device facilitates easier network planning by eliminating

restrictions of edge device placement near AC power outlets

and reduces the need for AC wiring and installation costs while

delivering higher reliability.

Standard Fe atureS

Installation

• Compact size

• Plug-and-play design

• Standalone or wall-mount installation

• Can be used with the IFS SP-PoE splitter

or other IEEE 802.3af compliant devices

Standards Compliance

• Supports 10/100Base-TX Ethernet

• Complies with IEEE 802.3/802.3u

• Complies with IEEE 802.3af PoE Standard

PoE Circuit

• Auto-detect of PoE IEEE 802.3af equipment

providing protection from incorrect installation

• Current overload detect

• PoE Ready/In-use LED indicator

Physical Ports

• Four RJ-45 connectors for data

• One power connector for power input

• Four RJ-45 connectors for data and 48VDC

output to a single Category cable

Network Cable

• For use with EIA568 Category 5 or better cables

• Can deploy data and PoE on four individual Category

cables up to 100m (328 ft.) to four individual PoE

powered (PD) edge devices

Warranty

• 3-year Warranty

Summary of content (2 pages)

PAGE 1
IFS Line / Network Transmission POE201-MS/4 4-Port Fast Ethernet/PoE-af Mid-span Injector Overview Standard Features The IFS 4-Port Fast Ethernet/PoE-af Mid-span Injector is a quick and easy solution that can be used when a network device does not provide the functionality as a power source equipment (PSE), such as a non-PoE switch, and yet several edge devices being deployed are PoE powered devices (PD).
PAGE 2
POE201-MS/4 4-Port Fast Ethernet/PoE-af North America T 855-286-8889 Asia T 852-2907-8108 Australia Europe T 61-3-9239-1200 T 32-2-725-11-20 Latin America T 561-998-6114 Mid-span Injector Specifications Ethernet Data Rate Throughput (packet per second) Ordering Information EIA/TIA-568 Standards Power Over Ethernet (PoE) PoE Standard PoE Power Supply Type PoE Output Pin Assignment PoE Output Power IEEE 802.3af Power over Ethernet / PSE Mid-Span / Type B 4/5(+), 7/8(-) 48VDC @ 350mA, 15.4 watts max.