User Manual
Table Of Contents
- Content
- Important information
- Chapter 1 Introduction
- Package contents
- Chapter 2 Hardware description
- Physical dimensions
- Front panel
- LED indicators
- Product specifications
- Chapter 3 Installation
- Installation precautions
- Chapter 4 Application diagram
- Point to multi-point
- Multi-point to multi-point
- Applications of POC252-1CXP-1T or POC switch with coaxial cable
- One POC252-1CXP-1T with PoE power input and one POC2052-4P-1CX with PoE power output
- One POC252-1CXP-1T with 48 to 56 V power adapter and one POC2052-4P-1CX with PoE power output
- One POC2502-8CXP-2T-2S with AC power input and one POC extender with PoE power output
- One POC2502-8CXP-2T-2S and one POC extender with PoE power output
- Appendix A Networking connection
Chapter 4: Application diagram
4. After enabling the POC function of the POC switch from the WebUI, the PWR LED
of POC2052-4P-1CX should illuminate immediately.
5. Connect a Cat5/6 UTP cable to the POC extender and an IEEE 802.3at/af
compliant PoE IP camera or PoE wireless AP.
Note:
1. PoE output capacity is based on different DC power input / PoE input.
2. The POC252-1CXP-1T has two power input options; only one mode is available at
one time. PoE power input cannot be used if power input of DC 52 V or 56 V is
selected.
One POC2502-8CXP-2T-2S and one POC extender with PoE
power output
Functions
POC2502-8CXP-2T-2S POC switch POC2052-4P-1CX POC extender
Power Input
Power cord with AC 100~240V,
50/60Hz, auto-sensing
External DC 24~48V power input
Power Output
BNC with DC power over coaxial
output
RJ45 with 802.3at/af PoE output
WARNING: After the power over coaxial injector is enabled, the center pin of the
coaxial cable has electricity. Please do not touch the center pin.
20 POC2052-4P-1CX PoE Over Coaxial Extender User Manual