Installation Manual

Page 3
Quik Bridge ® Two-Channel Receiver
Sensor and Touchpad Compatibility
The following current ITI Learn Mode™ wireless
devices are compatible with this receiver:
■ Two- and Four-Button Keychain Touchpads
■ PIR motion sensors
■ Smoke sensors
■ Panic sensors (60-578 only)
■ Door/window sensors (see note below)
Note: Only the internal reed switches of a door/win-
dow sensor can be used. The receiver does not
support the use of door/window sensors with
external devices connected to the sensor termi-
nal block.
Control Panel Compatibility
The receiver will work with any conventional hard-
wired control panel. To operate efficiently, however,
some specific features on some panels may requir
unique receiver programming. The following proce-
dures will enable you to adapt the receiver to several
common control panels. If you have a question or con-
cern about a panel or feature not described here, please
call our help line for additional instructions.