Installation Manual
Table Of Contents
NX-450, NX-451 Door/Window Sensors Installation Instructions 3
To replace a sensor:
1. Test a known good sensor at the same location.
2. If the system does not respond, avoid mounting a sensor
at that location.
3. If the replacement sensor functions, return the problem
sensor for repair or replacement.
Specifications
Power source 2 AAA Alkaline batteries
Dimensions L = 4.5” X W = 1.2” H = .94”
Typical battery life 4-6 years (not verified by UL)
Operating temperature range 10° to 120° F
Regulatory information
Manufacturer Caddx Controls, Inc. 1420 North Main Street
Gladewater, Texas 75647
FCC compliance These devices comply with part 15 of the FCC
rules. Operation is subject
to the following two conditions:
1. These devices may not cause harmful
interference.
2. These devices must accept any interference
received, including
interference that may cause undesired operation.
Changes or modifications not expressly approved
by Interactive Technologies,
Inc. can void the users’ authority to operate the
equipment.
Contact information
For contact information, see www.utcfireandsecurity.com or
www.interlogix.com.
For technical support, toll-free: 888.437.3287 in the US
including Alaska, Hawaii, Puerto Rico, and Canada. Outside
the tool-free area, contact your dealer.
Caddx is a registered trademark of Caddx Controls, Inc.
Copyright © 2011 Interlogix, a UTC Fire & Security Company.
All rights reserved.