Owner manual

NX-1710E Single Door Control
22
SEG
DESCRIPTION
5 WEIGAND FORMAT ENABLES
1 =
Weigand format # 1
2 = Weigand format # 2
3 = Weigand format # 3
4 = Weigand format # 4
5 = Weigand format # 5
6 = Weigand format # 6
7 = Weigand format # 7
8 = Weigand format # 8
LOCATION 4 – PROGRAMMING THE ZONES
1 DOOR SHUNT ZONE Default = 0
 Additionally, this zone must be configured in the control panel as a Door Shunt zone by programming an unused
Zone Type Characteristic in locations 111-169 (Seg 4, Opt 4).
2 REQUEST TO EXIT (RTE) ZONE Default = 0

Additionally, this zone must be configured in the control panel as an RTE zone by programming an unused Zone
Type Characteristic in locations 111-169 (Seg 4, Opt 3).
LOCATION 5 – READER TIMERS
1
Scan Time (1/100 seconds)
Default =
100 (1 second)
2
Relay Active Time (seconds)
Default = 10
3
Door Fault Warning Time (seconds)
Default = 30
4
Door Fault Alarm Time (seconds)
Default = 60
LOCATION 6 – OPENING TIME FOR SCHEDULE 1
1
Hour of Opening (24-hr format)
Default =
8 (8 AM)
2
Minutes after Hour of Opening
Default = 0
LOCATION 7 – CLOSING TIME FOR SCHEDULE 1
1
Hour of Closing (24-hr format)
Default =
20 (8 PM)
2
Minutes after Hour of Closing
Default = 0
LOCATION 8 – DAYS FOR SCHEDULE 1
1 = "On" if schedule is active on Sunday.
2 = "On" if schedule is active on Monday.
3 = "On" if schedule is active on Tuesday.
4 = "On" if schedule is active on Wednesday.
5 = “On” if schedule is active on Thursday.
6 = “On” if schedule is active on Friday.
7 = “On” if schedule is active on Saturday.
8 = “On” if schedule is disabled on holidays.
LOCATION 9 – OPENING TIME FOR SCHEDULE 2
1
Hour of Opening (24-hr format)
Default =
8 (8 AM)
2
Minutes after Hour of Opening
Default = 0
LOCATION 10 – CLOSING TIME FOR SCHEDULE 2
1
Hour of Closing (24-hr format)
Default =
20 (8 PM)
2
Minutes after Hour of Closing
Default = 0
LOCATION 11 – DAYS FOR SCHEDULE 2
1 = "On" if schedule is active on Sunday.
2 = "On" if schedule is active on Monday.
3 = "On" if schedule is active on Tuesday.
4 = "On" if schedule is active on Wednesday.
5 = “On” if schedule is active on Thursday.
6 = “On” if schedule is active on Friday.
7 = “On” if schedule is active on Saturday.
8 = “On” if schedule is disabled on holidays.
LOCATION 12 – OPENING TIME FOR SCHEDULE 3
1
Hour of Opening (24-hr format)
Default =
8 (8 AM)
2
Minutes after Hour of Opening
Default = 0
LOCATION 13 – CLOSING TIME FOR SCHEDULE 3
1
Hour of Closing (24-hr format)
Default =
20 (8 PM)
2
Minutes after Hour of Closing
Default = 0
LOCATION 14 – DAYS FOR SCHEDULE 3
1 =
"On" if schedule is active on Sunday.
2 = "On" if schedule is active on Monday.
3 = "On" if schedule is active on Tuesday.
4 = "On" if schedule is active on Wednesday.
5 = “On” if schedule is active on Thursday.
6 = “On” if schedule is active on Friday.
7 = “On” if schedule is active on Saturday.
8 = “On” if schedule is disabled on holidays.