User guide

NX-1700E Card Reader
11
LOCATION 271 PROGRAMMING THE DATE OF HOLIDAYS IN JANUARY
(8 segments of numerical data) Program the day of the month in January that the Opening time in a schedule is suppressed. For
example, if the opening should not occur on January 1, program a “1” in Segment 1. This feature can be repeated up to a maximum
of 8 holidays per location (month). (Default is No holidays)
LOCATIONS 272 - 282 PROGRAMMING THE DATE OF HOLIDAYS FROM FEBRUARY TO DECEMBER
(8 segments of numerical data) Locations 272 - 282 are used to program the day of each month, from February to December, in
which the Opening time in a schedule is suppressed. Each location will accommodate up to a maximum of 8 holidays, and
programmed with the same steps as Location 271 described previously.
Location 272 – February holidays
Location 273 – March holidays
Location 274 – April holidays
Location 275 – May holidays
Location 276 – June holidays
Location 277 – July holidays
Location 278 – August holidays
Location 279 – September holidays
Location 280 – October holidays
Location 281 – November holidays
Location 282 – December holidays
Location 283 Programming Activation Data for User Cards 1 through 120
(15 segments of binary data) This location is used to select which user cards 1 - 120 are activated. If the LED is “on”, the card is
active. Each segment has 8 LEDs corresponding to the 8 possible user cards. Example: Segment 4, LED2 indicates that user card
26 is active.
SEG USER
CARDS
SEG USER
CARDS
SEG USER
CARDS
SEG USER
CARDS
SEG USER
CARDS
1
1 - 8
4
25 - 32
7
49 - 56
10
73 - 80
13
97 - 104
2
9 - 16
5
33 - 40
8
57 - 64
11
81 - 88
14
105 - 112
3
17 - 24
6
41 - 48
9
65 - 72
12
89 - 96
15
113 - 120
LOCATION 284 PROGRAMMING ACTIVATION DATA FOR USER CARDS 121 THROUGH 240
(15 segments of binary data) This location is used to select which user cards 121 - 240 are activated. If the LED is “on”,
the card is active. Each segment has 8 LEDs corresponding to the 8 possible user cards. Example: Segment 15, LED8
indicates that user card 240 is active.
SEG USER
CARDS
SEG USER
CARDS
SEG USER
CARDS
SEG USER
CARDS
SEG USER
CARDS
1
121 - 128
4
145 - 152
7
169 – 176
10
193 - 200
13
217 - 224
2
129 - 136
5
153 - 160
8
177 - 184
11
201 - 208
14
225 - 232
3
137 - 144
6
161 - 168
9
185 - 192
12
209 - 216
15
233 - 240
LOCATION 285 CODE ENTRY LOGGING PARTITION
(1 segment of numerical data) This location programs the partition that is logged with the Code Entry message and sent when the
following conditions are met:
 An RTE scan function is selected (Location 0, Segment 1/2/3, Option 8); and
 “RTE from a scanned card is to be logged as Code Entry” is enabled (Location 242, Segment 1, Option 5).
Entering a 0 (zero) will send the lowest valid partition of the reader. Entering 1-16 will send the entered value as the partition.
(Default is 0.)