User Manual User guide
Table Of Contents
- Chapter 1 TVN 20 System Basics
- Chapter 2 TVN Advanced Topics
- HDD Configuration & Management
- Account Management (Users)
- Advanced Camera Settings
- Exception Parameters – System Health Monitoring
- Video Loss
- Remote Record & Video Download
- Additional Network Settings
- Remote Update
- Serial Port Settings – RS-232 & RS-485
- Log Files
- Appendix A Troubleshooting
- Appendix B TVN 20 Specifications
- Appendix C TVN 20 IP Camera Capacities
- Appendix D TVN 20 Supported IP Cameras
- Appendix E TVN 20 USB Archive Options
- Appendix F TruVision Device Finder
- Appendix GGlossary of Terms
- Appendix HWarranty and Support
72 TruVision NVR 20 User Manual
9. Follow the same procedure as instructed for setting up schedules for Video
Motion detection which includes:
• Selecting the Day.
• Establish up to 8 time periods per day for when detection is
enabled.
• Copy the days schedule to other days or to the full week or
weekend.
• Clicking OK once you have the settings you wish and return to the
main area for Video Tamper setup.
10. Determine what notification steps are to occur upon event trigger by selecting
Settings button from the Linkage area on the main Video Tamper page.