User Manual User guide
Table Of Contents
- Chapter 1 TVN 20 System Basics
- Chapter 2 TVN Advanced Topics
- HDD Configuration & Management
- Account Management (Users)
- Advanced Camera Settings
- Exception Parameters – System Health Monitoring
- Video Loss
- Remote Record & Video Download
- Additional Network Settings
- Remote Update
- Serial Port Settings – RS-232 & RS-485
- Log Files
- Appendix A Troubleshooting
- Appendix B TVN 20 Specifications
- Appendix C TVN 20 IP Camera Capacities
- Appendix D TVN 20 Supported IP Cameras
- Appendix E TVN 20 USB Archive Options
- Appendix F TruVision Device Finder
- Appendix GGlossary of Terms
- Appendix HWarranty and Support
TruVision NVR 20 User Manual 1
Chapter 1
TVN 20 System Basics
Introduction
The TruVision NVR 20 (TVN 20) is a network video recorder capable of recording
video from up to 16 IP cameras (depending on the specific model). The TruVision
NVR 20 can be configured with one, two, four, or eight SATA disks (storing 2 TB
each).
This manual is divided into two primary sections:
• TVN 20 System Basics
• TVN 20 Advanced Topics
System Basics identifies the most common operational elements needed to
properly set up the unit for everyday needs.
Advanced Topics provides additional detail on system features not covered in
detail under System Basics.
Package Contents
The package contains:
• The TruVision NVR 20
• Separately packaged Hard Drives
Note: Depending on the model, there may be 1, 2, 4, or 8 hard drives
configured on your system.
• AC Power Cord (USA: USA Power Cord; EMEA: Europe Mainland and UK
Power Cords)
• Plastic Bag with Terminal Blocks for alarm input/output connectors
• Plastic Bag with Rack Ears and Screws
• Quick Start Guide