User Manual User guide
Table Of Contents
- Chapter 1 TVN 20 System Basics
- Chapter 2 TVN Advanced Topics
- HDD Configuration & Management
- Account Management (Users)
- Advanced Camera Settings
- Exception Parameters – System Health Monitoring
- Video Loss
- Remote Record & Video Download
- Additional Network Settings
- Remote Update
- Serial Port Settings – RS-232 & RS-485
- Log Files
- Appendix A Troubleshooting
- Appendix B TVN 20 Specifications
- Appendix C TVN 20 IP Camera Capacities
- Appendix D TVN 20 Supported IP Cameras
- Appendix E TVN 20 USB Archive Options
- Appendix F TruVision Device Finder
- Appendix GGlossary of Terms
- Appendix HWarranty and Support
TruVision NVR 20 User Manual 49
Local Browser PC Settings
From the Config tab the user can configure the main settings for IP cameras
listed under Remote Config as well as set the behaviors for the Client PC that is
connecting to the unit via the browser.
The settings on the Local Config page ONLY apply to the browser connection via
that specific client PC (local to that PC). The default settings should be
acceptable for most normal usage. Please refer to the section Remote Record
& Video Download in the TVN 20 Advanced topics area of this manual.
The settings of specific interest may be the default file paths for saving recorded
files (manual recording), capture snapshots live (preview), capture snapshots
from playback, and downloading video clips wherein the User may wish to
change the default storage locations. Please note, the ability of users to
download and take snapshots is managed under the Account Management
settings (Remote Config).
Figure 29: The Config tab