User Manual User guide
Table Of Contents
- Chapter 1 TVN 20 System Basics
- Chapter 2 TVN Advanced Topics
- HDD Configuration & Management
- Account Management (Users)
- Advanced Camera Settings
- Exception Parameters – System Health Monitoring
- Video Loss
- Remote Record & Video Download
- Additional Network Settings
- Remote Update
- Serial Port Settings – RS-232 & RS-485
- Log Files
- Appendix A Troubleshooting
- Appendix B TVN 20 Specifications
- Appendix C TVN 20 IP Camera Capacities
- Appendix D TVN 20 Supported IP Cameras
- Appendix E TVN 20 USB Archive Options
- Appendix F TruVision Device Finder
- Appendix GGlossary of Terms
- Appendix HWarranty and Support
34 TruVision NVR 20 User Manual
Figure 21: The Copy to… dialog box
Step 9: Final Steps for Recording Schedules – Motion
Detection Trigger
In order for Motion Recording to be possible, motion detection must be enabled
on the desired cameras.
This is a simple two-step process:
1. Enable Motion Detection on the IP Camera.
2. Define the activation schedule for the IP Camera motion detection trigger.
For select IP Cameras, the TVN 20 can configure motion detection areas
(regions of interest) within the TVN Browser. For the other IP cameras, the
TVN 20 incorporates a link to the IP camera’s web page to enable configuring
motion detection directly on the IP Camera.