User Manual User guide
Table Of Contents
- Chapter 1 TVN 20 System Basics
- Chapter 2 TVN Advanced Topics
- HDD Configuration & Management
- Account Management (Users)
- Advanced Camera Settings
- Exception Parameters – System Health Monitoring
- Video Loss
- Remote Record & Video Download
- Additional Network Settings
- Remote Update
- Serial Port Settings – RS-232 & RS-485
- Log Files
- Appendix A Troubleshooting
- Appendix B TVN 20 Specifications
- Appendix C TVN 20 IP Camera Capacities
- Appendix D TVN 20 Supported IP Cameras
- Appendix E TVN 20 USB Archive Options
- Appendix F TruVision Device Finder
- Appendix GGlossary of Terms
- Appendix HWarranty and Support
TruVision NVR 20 User Manual 31
6. Any day of the week may be selected in the Weekday drop down (we will
copy this to every day of the week later.
7. Click on Period1.
8. Enter 0:0 for the start time and 6:45 for the end time (you can enter the values
directly or use the selection buttons).
9. From the Recording mode drop down list, select Motion Detection.
10. Select Period2.
11. Enter 6:45 for the start time and 17:0 for the end time.
12. From the Recoding mode drop down list, select Scheduled Recording.
13. Select Period3.
14. Enter 17:0 for the start time and 24:0 for the end time.
15. From the Recoding mode drop down list, select Motion Detection.